Every year, I tear my Warn hubs down for maintenance and a general inspection. The maintenance is directed towards the...
I think it started around the first of the year when my buddy MikeW and I were with some friends....
I had picked up a set of D-30 inner and outer axle shafts from a friend in California when we wheeled the Rubicon together. Having gone to 35″ tires during my last lift, I thought it would be prudent to carry a set, “just in case”. It seems that when...
Note: Steve was gracious enough to let me post his write-up on how to do a u-joint replacement. This came...
Shortly after I had installed my Tom Wood front drive shaft, I came across an on-line forum thread that was started...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble opinion, it is not the company it use to be and the quality isn’t there anymore. Ron Stobaugh, who was the driving force behind Alloy USA, has parted ways with...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble opinion,...
I recently got an e-mail from a Jeeper, FrankT, who uses my site and frequents some of the same forums I do. He had recently done a ball joint replacement on a high pinion Dana 30 axle that he was prepping for a swap into his TJ. He noticed that...
Two years ago, when the Toys by Troy Alumi-flex lift went on the TJ, I installed a Tom Wood rear...