Body and motor mount lifts….a pretty popular combination in the TJ arena. I put both on when I was getting...
Note: Toys by Troy shut down their operation at the end of 2007. I’ve added this information after receiving numerous...
Every year, I tear my Warn hubs down for maintenance and a general inspection. The maintenance is directed towards the bearings and anything else that looks like it requires attention. Given the environment that our axles are subjected to (big tires, water crossings, dust, mud, etc.), a couple of hours...
I think it started around the first of the year when my buddy MikeW and I were with some friends....
I had picked up a set of D-30 inner and outer axle shafts from a friend in California when we...
Note: Steve was gracious enough to let me post his write-up on how to do a u-joint replacement. This came right after a trail run where one of our friends suffered a rear drive shaft u-joint failure while attempting to climb a steep rock shelf. I learned first hand how...
Shortly after I had installed my Tom Wood front drive shaft, I came across an on-line forum thread that was started...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble opinion, it is not the company it use to be and the quality isn’t there anymore. Ron Stobaugh, who was the driving force behind Alloy USA, has parted ways with...
Most of you that have been following Lady’s progress over the years have come to realize that my mods provide either increased...