Speaking of fluid hose, I am using Parker Hi-Temp Push-Lok synthetic hose, type 836-6. It is rated at 250 PSI...
Scott had a high flow thermostat housing that we wanted to install at the same time. Just two bolts hold...
Note: The company that made the shifter I used in my installation is no longer in business. I have left this write-up here since it gives folks an idea of how an electronic push button shifter is adapted to the vehicle and the driver. As I write this, there is...
Now we start getting into the fun part of the project. I’m not going to go into a lot of...
I had finished up my 2000 Memorial Day weekend trip at the volcanic Cinders Recreation Area near Flagstaff, AZ when...
Stu’s comments: I had gotten home from work and was running through my e-mail when I found one from Josh. Josh had recently shared his TJ hood project with me which was put on the site. In his e-mail, he mentioned he had done some mods on a cold air intake. Since...
Ever remove the serpentine belt and then realize you can’t remember the path it took as it snaked around all...
Both of these items are pretty much a “no brainer” installation. I put them here for the new folks who...
These are instructions for replacing the output shaft on a np231 transfer case and installing a Slip Yoke Eliminator. This is intended as a guide line only. During the installs we used two different kits an Advanced Adapters and Bayou Geep kit. The two kits are similar but, the minor differences...
Note: Before we get to Drew’s excellent write-up, I just want to extend a BIG thank you to Drew for...