Here is the mount attached to the fire extinguisher. As you can see, a pair of hose clamps firmly secures...
Note: Toys by Troy shut down their operation at the end of 2007. Instead of removing this write-up, I am...
About 8 months ago, I removed the AX-15 manual transmission and installed an AW-4 automatic transmission. At the time, I opted to use two smaller fluid coolers instead of a larger model. One, with a 400 CFM 12V fan, was mounted over the rear axle. It was my “backup” cooler...
Note: The company that made the shifter I used in my installation is no longer in business. I have left...
Scott was returning from a weekend get away with his wife when he noticed a 5th gear vibration in the...
Speaking of fluid hose, I am using Parker Hi-Temp Push-Lok synthetic hose, type 836-6. It is rated at 250 PSI and 300F which is adequate for the pressure and temperature that the tranny fluid should produce while they flow around the TJ in an attempt to get cooled off. I...
Stu’s comments: A number of months ago, Tim Doumit, a very good Jeepin’ buddy that I’ve had the pleasure of...
It has been about 24K miles since the last fluid change in my manual tranny so I thought I would...
Now we start getting into the fun part of the project. I’m not going to go into a lot of detail on the steps necessary to remove the AX15. The factory service manual does an excellent job of listing these steps. I’m just going to give a quick overview and...
Do-it-yourself wheel/tire kit! I bought Lady, my ’98 TJ, in the spring of ’99. With the factory 28″ tires...