Whether it be during a run or in the driveway, there comes a time when you will need to remove...
I had finished up a week in Moab, wheelin’ with some friends, and I noticed that the front drive shaft...
While I was working on the 2nd build up of Lady, I acquired a pair of D44 rear axle shafts quite unexpectedly. I had bought some used 35″ MT/Rs from a Tucson Jeeper and he had brought them up to the Phoenix area while visiting a friend. I had gone...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble opinion,...
So you have installed your brand new slip yoke eliminator (SYE) on your transfer case and you just finished tightening the bolts on your new double cardan drive shaft (also called a constant velocity or “CV” drive shaft). Before you decide to take it out for a test drive, you...
Eventually there comes a time when you might need to remove an axle shaft from your D35c rear axle. Although...
If you have installed a suspension lift where you had to change out your control arms, you have done about...
I can’t take credit for this idea….that belongs to BlaineJ (a.k.a., mrBlaine on various forums). A big thanks to BlaineJ for sharing this with everyone. The above photo is what it looks like as you remove your unit bearing from the knuckle. Three bolts and the unit bearing is free...
Stu’s comment: Tim was good enough to take photos, make notes, and generally do everything else needed to document his...