Shortly after I had installed my Tom Wood front drive shaft, I came across an on-line forum thread that was started...
Every year, I tear my Warn hubs down for maintenance and a general inspection. The maintenance is directed towards the...
It started with a casual response to an e-mail I received concerning a page I had on my web site. The person inquiring about the page was Greg, the National Sales and Operations Manager at ARB Corporation in Australia. It ended the following week after I spoke with Jim, the...
I recently got an e-mail from a Jeeper, FrankT, who uses my site and frequents some of the same forums...
I can’t take credit for this idea….that belongs to BlaineJ (a.k.a., mrBlaine on various forums). A big thanks to BlaineJ...
Stu’s comment: Tim was good enough to take photos, make notes, and generally do everything else needed to document his Superior Super88 kit installation so that it could be shared with everyone. Since Tim and I don’t live anywhere near each other, he also got stuck doing this write-up, mostly...
NOTE: Since this article was written a number of years ago, Alloy USA has undergone some changes. In my humble...
If you have installed a suspension lift where you had to change out your control arms, you have done about...
While I was working on the 2nd build up of Lady, I acquired a pair of D44 rear axle shafts quite unexpectedly. I had bought some used 35″ MT/Rs from a Tucson Jeeper and he had brought them up to the Phoenix area while visiting a friend. I had gone...
The following information was posted on JU by Ryan, a forum contributor from West Virginia. When asked, he graciously agreed to...